Product description

Specific Parameters–Single 100W Arch Pro Fiberglass Flexible Solar Panel
| Maximum Power (W) | 100ยฑ5% W |
| Open Circuit Voltage Voc (V) | 37.8ยฑ5% V |
| Max Power Voltage Vmp (V) | 32.4ยฑ5% V |
| Max Power Current Imp (A) | 3.1ยฑ5% A |
| Short Circuit Current Isc (A) | 3.2ยฑ5% A |
| Solar Cells Efficiency | 25% |
| Product Diameter (IN) | 38.35 x 24.09 x 0.1 inches |
| Net Weight (kg / lb) | 2.1 kg / 4.6 lbs |
| Application Class | Class A |
| Max Static Load (front) | 2400 Pa |
| Max Static Load (back) | 2400 Pa |
| Max. System Voltage | 1000V DC |
-
Why can’t solar panels provide full output energy?
Output is limited by sunlight, controller efficiency (PWM 75%, MPPT >90%), power station PV input limits… Check your station’s voltage/current specs before connecting. Minimize shading and ensure your controller/station matches the panel’s Voc
-
Can this panel be used with a 48-volt system?
A single Arch Pro solar panel is only suitable for 12V or 24V systems, but by connecting two or more panels in series, it can be used in 48V systems(see Specific Parameters)
-
How do I install this solar panel by adhesive?
Clean the panel and roof with water/damp cloth. Apply adhesive (0.6cm wide, every 17cm) along back for stability and airflow. Place panel, press firmly with foam. Seal windward side. Cure for 48 hours
-
What is the length and AWG gauge of the cable leading out from the panel?
Arch Pro solar panels are equipped with 33.5 inches / 850mm 14AWG cables
-
What is the spacing between the holes when installing the solar panel?
Our 100W solar panels have a hole spacing of 18.66 inches / 474 mm. Our 200W solar panels have a hole spacing of 25.98 inches / 660 mm
From the brand
- More Stable Output: Say goodbye to unstable energy output with BougeRV Arch Pro flexible Solar Panel. Upgraded bypass diode technology captures more energy even in low-light conditions or partial shading, ensuring stable power output at all times
- More Busbar, More Power: BougeRV Arch Pro solar panel uses the high-level N-type16BB cell design with a 25% highest conversion rate. It makes the solar panel have a longer service life. Also, it can charge a 12V battery or a 24/48V battery by wiring several solar panels in series
- Longer Lifespan: BougeRV upgraded bypass diode technology enhances resistance to hot-spot effects, reduces the risk of panel damage, and extends the lifespan of the solar panel
- Durable and Robust: Using ETFE instead of PET, will not delaminate after long-term use. It has anti-scratch/self-cleaning/sand-proof capabilities and can resist impact and abrasion, preventing collisions and possible wear, scratches, etc. This happens frequently during transportation and maintenance activities
- Easy to Use: Weighing just 4.63 lbs and only 2.5mm thick, the BougeRV bendable solar panel is made with special lamination technology for a slim and light design. It comes with 2.95ft pre-attached cables and supports various installation methods, including hanging holes, adhesive backing, and glass glue. Sticky tape (sold separately) can also be used for easier setup
- Max To 270ยฐ Flexible: Matches more curved surfaces, allowing you to install where rigid solar panels cannot. Make full use of the limited space on the roof or even the curved part of the front of the car
- Note on Power Output: The rated power is tested under ideal laboratory conditions. In real use, actual power output will naturally vary depending on factors such as sunlight intensity, the angle of the panel, and ambient temperature…
- 1-on-1 Solar Solution by BougeRV Tech Team. BougeRV promises a 5-year product tech support and all-time warm-hearted service for you. Please get in touch with us whenever you have any problems with the BougeRV solar panel. We will provide you with a professional guide to building a solar system
Related
Discover more from Solar Panel Central
Subscribe to get the latest posts sent to your email.















































Sam Ordiway –
Great output
Actually makes more power than my old Sunpower 110W