New 25W Dual USB 12V Solar Panel with Car Charger + 10/20/30/40A USB Solar Charger Controller for Outdoor Camping LED Light
Used to charge mobile phone, MP3, pad, or other USB-charged device.
Double USB female port, easily charge device via USB charging cable.
You can place the panel in the sun and use it to directly charge your device.
Great for outdoor cycling, climbing, hiking, camping, traveling, etc.
1.Build-in industrial micro controller.
2.Fully 4-stage PWM charge management.
3.One-key setting,digital display, auto memory function.
4.Dual mosfet Reverse current protections, low heat productions.
5.Build-in short-circuit protections, open-circuit protections, reverse protections, over-load protections.
USB output: 5V
USB port quantity: Double
Solar panel voltage: DC12-18V
Material: Polysilicon silicon cell
Solar panel power: 25W
Suitable for: Cycling, Climbing, Hiking, Camping, Traveling, etc.
Buck charge: 28.8V
Float charge: 27.4V
USB output: 5V/3A
Discharge stop: 21.4V
Voltage: DC 12V/24V
Max solar input: <50V
Rated working current: ≤20A
Discharge reconnect: 25.2V
Working temperature: -35℃~60℃
Output voltage: 12V/24V Automatically distinguish voltage
With Timer and light sensor, it could work for solar light system(Only For off-Grid PV Solar System):
-For 10A 12V Pv System: 120W Solar Panel, 12V Lead-acid Battery, 21V for Max input Voltage.
-For 10A 24V Pv System: 240W Solar Panel, 24V Lead-acid Battery, 42V for Max input Voltage.
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL(It is not suited for nickel metal hydride, lithium ions or other batteries).
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
1.Connect the battery to the charge regulator – plus and minus.it will show 1 ,if it detects 12V battery, 2 if it detects 24V battery.
2.Connect the photovoltaic module to the regulator – plus and minus.
3. Connect the consumer to the charge regulator – plus and minus.
Please allow 0-2mm error due to manual measurement. pls make sure you do not mind before you bid
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1X 25W Solar Panel
1X Solar Controller(10/20/30/40A)
4X suction cup
1x Crocodile clip
1X Car Charger
1X User Manual